Re: Which 3 button mouse do you recommend?
I ended up with the 4 wired. After using it for a few days I replaced my keyboard with a mini keyboard. I found with the Evoluent my right hand needed to travel too far. Wish I could have afforded a...
View ArticleRe: Creo 2.0 Student-Version doesn´t open
Ok, everytime the window opens this warning appears: Warning: Proper TCP/IP configuration was not detected The TCP/IP protocol is not installed or configured properly.
View ArticleRe: Given/Find "this variable is undefined"
hey guys thanks a million. you both are right. gotta admit im kinda new using mathcad to solve themodynamics problems, i usually use a couple of special excelsheets to solve them, but in this case...
View ArticleRe: Given/Find "this variable is undefined"
You have assigned the results of the solve block to the vector "solucion" and not to the variables used for the calculation. So they still are assigned the guess values.You either have to assign a...
View ArticleClik here to view.
Re: Given/Find "this variable is undefined"
There are at least two problems in your sheet. The most prominent one is a simple typo you can quickly find using "Trace error" as Alan had shown:The system still will not solve after you delete that...
View ArticleRe: Creo 3.0 - Licence request failed for feature
I am trying to install creo3.0 and I am having the same problem as mr. cramlet. I used the code BK400407EDSTUDENTUNICL for the simple license error. I don't understand what exactly mr. cramlet did to...
View ArticleRe: A problem with plotting
Thanks you very much, Can you please let me know if I am right about how you corrected this for me? (i just want to understand totally) when you wrote: tfn(finalCoOEPcon, finalconcoronene) := find(t)...
View ArticleClik here to view.
Re: A problem with plotting
AlanStevens wrote: See attached. I re-arranged your equation to make the solution less sensitive to the initial guess for t. AlanI hadn't realized that he wanted to solve the last equation for t. I...
View ArticleRe: What are the steps to update/upgrade Relex2011 to WindchillQS10.2?
Hi Shwete, when you download the upgrade you can also download the documentation which will walk you through the process. There's a database upgrade planning guide in addtion to the installation...
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Part of issue with 15 is the graph displays. It is very slow when I scroll, especially if I have multiple lines on the same graph. Might be some setting I can alter to change that I am unaware of or...
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Part of issue with 15 is the graph displays. It is very slow when I scroll, especially if I have multiple lines on the same graph.I guess this is only the case when you open the sheet the first time or...
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Correction:Generally it would be hard impossible to believe that MC15 is slower than Prime.
View ArticleClik here to view.
Re: is it possible to track "b-graph" on "a-graph"
I mean a_graph is changed to b_graph.I have airfoil data each. I need to consider mutation becasue airfoil is changed.I just have cross-sectional area data. so I consider variation area.I attached...
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Actually, the problem only really appears when I have the zoom at say 200% or 150% and have scrolled to the bottom, and then start scrolling up, it acts like it is replotting the graphs for each...
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Richard Jackson wrote: Correction:Generally it would be hard impossible to believe that MC15 is slower than Prime.Sorry, my fault. You are perfectly right. :-)
View ArticleRe: Optimizing (max / min) of a function in terms of parameters given:
Jake Roth wrote: Actually, the problem only really appears when I have the zoom at say 200% or 150% and have scrolled to the bottom, and then start scrolling up, it acts like it is replotting the...
View ArticleRe: Number of decimals in dual dimensioning (Drawing)
dual_digits_diff will control the number of decimal places on the secondary dimension.
View ArticleRe: Create a centre line in a drawing on a swept profile
I'd select the surface generated by the radius and add an axis. Creo doesn't do it because it can't be sure the extrusion will be linear when using a sweep. Since an axis can't bend around a curved...
View ArticleHide header row of 2D repeat region OR change header text
I am trying to hide the header of my 2D repeat region because the header descriptions are from the family table items that were added whether they're dimensions or parameters or what have you. This...
View Article