Re: How to redisplay "See Detail XX" on the source view of a drawing once it...
It would be less painful if PTC allowed the border to be a polygon, not a spline of a thousand points.
View ArticleClik here to view.
Using a vector of values as an input for a function
I have the problem that I would like to use a function with a set of values which are in an array. For example measured values. My problem is that inside the function is a multiplication, so the vector...
View ArticleClik here to view.
Projected Reference Points in Creo Parametric 2.0
Is it possible to create projected reference points in Creo Parametric 2.0? If so, how can it be done? This functionality is present in Creo Elements/Direct Drafting 17. See:...
View ArticleRe: Cosmetic feature in start part
Only one tip if those other yahoos are no longer in the picture:Make your start parts and assemblies with -sized- datum planes.This will limit the bounding box in a similar manner as the cosmetic...
View ArticleRe: How to redisplay "See Detail XX" on the source view of a drawing once it...
Oh, and just in case you don't purge your files... and the error was recent... you can always go back to a recent version if the added work was not too significant.
View ArticleClik here to view.
Re: Using a vector of values as an input for a function
Thank you for the quick answer! I found another solution, but I like yours more. Anyway you could work with matrix indices.There was an unanswered question where someone did it this way, just found it...
View ArticleRe: Attention: Mapkey Syntax changed between DateCodes
Hi Mahesh, How can we view the article CS39489? I searched PTCs main website as well as this community one and no results were found. Lawrence
View ArticleRe: How to take reference of the de-highlighted part for the activated part...
Should be how you usually do it, just takes a bit of squinting. May have to right click a larger amount of times to cycle through features.
View ArticleRe: How to take reference of the de-highlighted part for the activated part...
Oh and from time to time, when selecting surfaces, I have to rotate the assembly so that the surface is facing the "camera." For whatever reason, it won't select from the back side of some surfaces...
View ArticleRe: Filled text
In my non-current version it's under: "Insert, Model Datum, Sketch". I just did a quick test. You cannot xhatch a projected curve, and you cannot xhatch a projected cosmetic. But with the datum...
View ArticleRe: Using Area Driven Relation to Control Dimension
In your part I am unable to see the relations parameters or the the feasibility study. Any idea why this would be? I am trying to set it up formy part and I cannot seem to get it to work. Thanks
View ArticleClik here to view.
Re: Projected Reference Points in Creo Parametric 2.0
So in the case of non-perpendicular lines with a round (forgive the crude drawing), I'd need to use construction lines that are made coincident to the geometry and then put a point at their...
View ArticleRe: Projected Reference Points in Creo Parametric 2.0
There is actually an option to draw those intersecting lines on the drawing. Not sure at the moment what it is called. As for doing this in the model sketch, you can use the fillet feature in the...
View ArticleClik here to view.
Re: Filled text
Take a look at the attached PDF...Scale: 1:1, Line weight .025"; font (Swiss condenced) .22 high; circles .625" OD In order to get this to extrude, I had to change the part accuracy to .0005"
View ArticleRe: Mathcad Prime Issue
Werner Exinger wrote: There are indeed a couple of things to consider if we want to do without ranges and backward compatibility would be a major issue (unless they treat program development still that...
View ArticleRe: Filled text
Attached is the whole file set at half the size of the previous (using the TTF font)... Creo 2.0 full versionIt has a pen table in there too.
View Article