How to calculate torsional stiffness?
I want to calculate the torsional stiffness of a cross member and compare two different materials. So i put Steel as material and enter the values: Material 1Tensile Yield Stress: 460 MPa Tensile...
View ArticleRe: trail file of pro/e
Thanks for you reply. But is there any chance to change this? Have you ever connect pro/e with modefrontier?Thanks, this is very important for me.
View ArticleRe: Creo is very slow on my laptop, any suggestions?
You cannot change graphics card inside the notebook. Maybe you can check at Dell, whether newer drivers for Intel(R) HD Graphics 3000 exists. Martin Hanak
View ArticleRe: trail file of pro/e
Hi, my suggestion is to add the following option into config.pro file new_parameter_ui no Restart Creo/ProE and you will get old user interface for managing parameters. Try to create a parameter and...
View ArticleRe: trace back error
Traceback is designated for PTC Support, only. Nobody at Community is able to interpret its contents. Martin Hanak
View ArticleRe: trail file of pro/e
Yeah, it did work. Here is still the question, I still cannot connect pro/e with modefrotier using the trail file of pro/e.Could you give me further help? I will be greatful. Thanks.
View ArticleRe: trail file of pro/e
Is it possible for this sentence " `<VAR name="R" format="0.0000E0"/>`" to appear in the trail file?
View ArticleRe: How to calculate stress in a specific point?
Sketch a curve, with one end at the point that you want to measure, and rerun the analysis. Then you can show a graph of the stress along that curve. It will give you the choice of which end to make...
View ArticleRe: Citrix and Desktop Integration (DTI) - who has a need for this?
Hi Joe, We are really interested in using Citrix and DTI together. At the engineering departement we all have work stations, but all other departments are using thin clients running Citrix. Now we are...
View ArticleClik here to view.
Re: Removing hidden welds in drawing sections?
http://www3.eng.cam.ac.uk/DesignOffice/cad/proewild3/usascii/proe/fundamentals/fund_four_sub/to_create_cross_sections_through_quilts.htm...
View ArticleWindchill logs say everything starts but "Service is Temporarily Unavailable"
Hi Folks, Seems like every few days I come back to Windchill to try to do something it's down again with some new issues that I can't figure out. This time, when i connect to the server I get the...
View ArticleClik here to view.
Re: trail file of pro/e
The PTC group has little experience with modeFRONTIER. Yours are the only questions about it on PTC Community. You could contact Esteco for support or hire a consultant with experience to show you.
View ArticleRe: im createtrigger with rule problem
Hi Daniel, I attempted to run your command in a Microsoft Windows environment using cmd.exe - you are correct, this command work partially to have an incorrect rule as you stated. When I surrounded...
View ArticleRe: data sets/function
Thank you it works. There is just one question. Is there any chance that interpolation disturb my original data? Is "linterp" the best function for this job?
View ArticleRe: High local stress at inside corner
Thank you for your response, that makes sense. Does Mechanica/Simulate do elasto-plastic analysis? We've never looked for it.Thanks again!
View ArticleRe: High local stress at inside corner
Thanks! We have already been experimenting with a radius, but other constraints mean that even a big one doesn't quite fix it, though it does help.
View ArticleRe: cam-connection on intersect (double curved surface)
Not yet http://help.ptc.com/creo_hc/creo30_pma_hc/usascii/index.html#page/pma/simulate/cams/surfaces_cams.html...
View Article