Re: Multi sheet drawings
Just to be clear, as far as I can tell Creo does not use the "current format/size on the next sheet" but rather always uses the format/size of sheet 1 for all new sheets. This is the rub.
View ArticleRe: Interpolation
As the values of your vector VX are in descending order you may simply use reverse(VX) and reverse(VY) instead of VX and VY.
View ArticleImproving PTC's University program
PTC has UTTERLY dropped the ball on this. Solidworks is being taught at many colleges, while none of the Engineers out of school that we've talked to have Pro/E experience. We cannot find someone who...
View ArticleRoute multiple wires to one pin
How can you route more than one wire to the same pin in a connector? When I try I get an error that reads "cannot route more than one cable to WIRE entry port." I have seen models that have two wires...
View ArticleRe: Improving PTC's University program
Hey Frank - You bring up an important topic for discussion, which didn't really relate to our conversation about helpful resources for our FIRST students. As a result I've branched this conversation...
View ArticleRe: Multi sheet drawings
When I create a drawing and I tell it to use my format (or my template), it automatically starts with sheet one of my format. Then when I create subsequent sheets, it automagically gives me sheet 2...
View ArticleRe: Planes and Axis' not visible.
Steven, As Doug mentioned one of the possible reason for axis is option display_axes no in config.sup. Regarding warning on start "Feature obtained" is to inform that the license for Routed_System_set...
View ArticleClik here to view.
Multi level Cables versus Single level Cables
I'm looking for more pros and cons on this issue. We have discovered an issue with Multilevel cables. On Multilevel cables, Creo Parametric "does not" read the cable diameter and minimum bend radius !...
View ArticleClik here to view.
Re: using parameter from part through assembly in BOM
I got the relation to add up all the component lengths based on your reply David but I cannot get it to populate in the table I have. I have the parameter "overall_length_1" and it has a value of "120"...
View ArticleRe: How to change the default setting for the element?
Various ACL settings and environment variables control table defaults. For example: set tabledefaultrulethickness and apttblcellmargb. They are documented in the Arbortext Command Language Reference...
View ArticleRe: Diff btw'n ..pvs & .pvp files
I have a similar question: what's the difference between .pvs & .pvz? I can't seem to find an explanation anywhere...
View ArticleClik here to view.
BOM Balloon Template
I have a drawing template created. In the template is a format, the BOM balloon table, and 2 views (one of which is tagged to show the BOM balloons). Whe the template is used: I get the following...
View ArticleRe: Diff btw'n ..pvs & .pvp files
http://help.ptc.com/creo_hc/creo30_pma_hc/usascii/index.html#page/pma/data_exchange/About_Data_Exchange_Between_ProductView_and.html The .edz and .pvz files are the compressed formats of the .ed and...
View ArticleClik here to view.
Problem with flexible parameters in assembly
Hi,I can't find out what am I doing wrong with my chain assembly model.End links and main links are assembled with MDX assembly constraints and flexible dimensions.At assembly level, all these...
View ArticleRe: BOM Balloon Template
I have never considered using a repeat region (bom) table in a template.I wonder if it has a problem picking up the assembly parameters when loading a new drawing.
View ArticleRe: Conversion issues going from .drw to .dwg
Just an update about DWG exporting - based on http://help.ptc.com/creo_hc/creo30_pma_hc/usascii/index.html#page/pma/data_exchange/About_Importing_DXF_or_DWG_Drawing_Files.html where PTC states "Note:...
View ArticleRe: 404 error for software downloads
I re-registered, but the 404 error is still present!
View ArticleRe: How to restore backup workspace
Benito, There is a third party utility that could be helpful here. Please refer to the following article: https://support.ptc.com/appserver/cs/view/solution.jsp?n=CS104751 Technical support also has...
View ArticleOpen a part make with student license Creo 2.0
Hi, I have downloaded the student version of Creo Parametric 2.0 yesterday, and i have some questions about that.I am a engineer student and i have to design some part on Creo Parametric at home....
View Article