Re: Sheet Metal Roller Bead
http://www.mate.com/en/products-and-parts/fabrication-solutions/rollerball(The original link is mis-posted) Interesting tool - I like the video The Mate Rollerball™ tool creates stiffening ribs and...
View ArticleRe: Кто знает когда выйдут Matchcad Prime 3.1 и Matchcad 15 M040?
Если спросить по-английски, то придёт быстрее.Но не новые заплатки, а ответ на ваш вопрос. А если говорить серьезно, то... "обещанного три года ждут", "хорошего понемножку" и т.д.
View ArticleHow can I insert my video in my message?
I can do it by reply, but not by first message.
View ArticleRe: How can I insert my video in my message?
There should be a tiny image of a film strip in the top of the edit box, between the paragraph formatting and the Insert links/happy face.
View ArticleClik here to view.
Clik here to view.
Re: Drill dragging through part from Hole to Hole
Hi Matt,Try setting the option "Pullout_Dist" to a dimension that clears your workpiece or boss/island. This determines how far out of the hole the drill comes out.If this dimension makes your tool go...
View Articleadding thread dimensions
i want to make drawing on creo 2 showing the dimension of pitch, pitch diameter and other like the attached picture . thanks
View ArticleRe: i am getting an error as this value must be a scalar
I don't experience any error in the sheet you posted.Which version and release of Mathcad are you using? I am using Mathcad 15 M030 and your sheet performs OK.
View ArticleRe: 0 mm rip pattern
Use projected curves onto the flat to get the lines to follow the surface bending/unbending. I think there isn't a way for the software to manage a slot that has no sides. A rip doesn't exist in a real...
View ArticleClik here to view.
Re: Issues when offsetting a boundary blend
my guess is related to the tail end of the offset mesh. i did notice unexpectedly that my hacked up geometry didn't even like offsetting around the leading edge of the shape, i resorted to using...
View ArticleRe: Mirror of Part: Something's not right
Why can't you create a new CSYS that aligns the part the way you want?
View ArticleClik here to view.
Re: Mirror of Part: Something's not right
David, That would be nice but you can't place a feature in front of the mirrored merge. You can't place a feature above mirrored merge id 1.
View ArticleRe: Mirror of Part: Something's not right
You don't have to.Create a new CSYS, oriented and located where you want, and use that instead of Default or Fixed as the assembly constraint.
View ArticleRe: adding thread dimensions
all dimensions of thread can be display just the pitch , and pitch diameter , please need a help
View ArticleClik here to view.
Re: Rule problem with New Value
Hi Daniel, When I use the below command it works as expected. Could it be something to do with your use of double quotes on multiple strings in the same rule rather than just quoting the whole rule?...
View ArticleRe: Working with OIR
Hi Chris, You can likewise find this information from the following articlehttps://support.ptc.com/appserver/cs/view/solution.jsp?n=CS77891 Thank you,Jarrett
View ArticleRe: blank 3d plot
Hi Robert, That is good information regarding sneaking in with MS Visual Studio - I can get various versions via friends in our software engineering group. Both my machine (good) and my colleagues...
View ArticleRe: Choppy and laggy rotation of 3D assemblies
John, Was the option provided by Mahesh helpful? Note that this option will require a restart of the software to take effect. Also note that in newer releases, I think this option is no longer...
View Article