Re: Influencing Curves
Thanks. I took the WF5 Surfacing class back in 2010, and I took the Freeform Surfacing too. The attached info is from the Surfacing class, and that's why I hold on to any books that I obtain, as it...
View ArticleRe: "Marked as Helpful" emails
I believe I've resolved this issue with a customization to our email templates. Let me know if you continue to receive any more of these email updates. To test this customization I'll add a "Mark for...
View ArticleRe: lack of precision in Creo Elements / Direct Modeling Express?
HiVincent,I can not confirmthese inaccuraciesasyou describeIfthe result of theworkis not right,I causedit myself But a sourceforinaccuraciescan bebe the measuring.Bydefaultis measuredwith an accuracy...
View ArticleRe: blank 3d plot
There's still something funny here. Titles appear depending on how scrolling stops. Clicking on the plot and then clicking outside the plot always makes them vanish.I don't see this problem....
View ArticleRe: lack of precision in Creo Elements / Direct Modeling Express?
Hi Friedhelm, Thank you for your response. I just adjusted those things. (I went to File->Settings->System->Measure -- right?) The settings for distance and angle were 6 and 1, respectively...
View ArticleClik here to view.
Re: Mirror of Part: Something's not right
Many places use a Mapkey to redefine the views so it's a 10 second process. Views are typically defined parametrically; if they are defined relative to the datum planes, the datum planes will appear in...
View Articleshow two positions
I am pretty new to Creo. but i have been using 3d programs for about 15 years. we are using Creo 2.0 still. I have a gripper on a slide that I want to show in two positions lets say up and down. I do...
View ArticleRe: Getting to page 2
I think so.I was trying to scroll down and see what I had missed the last few days since I was following the wrong things when I had the recent content open but found out it was all the recent...
View ArticleRe: Mixed part units in assembly results in incorrect weight calculation for...
I usually have pretty good luck with mixed unit assemblies calculating correctly. I would look to see if there is a component model that doesn't have a material or density assigned. Another thing to...
View ArticleMaking Lines in Tables Invisible (Creo 2.0)
I am creating a BOM table in Creo with repeat regions that also lists which parts are not shown in the drawing. I would like to make the vertical line inside the red box invisible. (Please reference...
View ArticleRe: Non-symmetric results for symmetric model and load?
Very interesting problem. I will take a look at it next Tuesday when I get back to my office. However, someone may have solved it by then.
View ArticleProblème d'arrondi
Why mathcad round, for example 1.25 to 1.0 in my equations? And what can I do to solve this problem? Thank you Pourquoi mathcad arrondi, par exemple 1.25 à 1.0 dans mes équations et que puis-je faire...
View ArticleRe: Mixed part units in assembly results in incorrect weight calculation for...
I've found that Proe / Creo does not handle mixed units well if some are mass based and others are force based. If all are one or the other, things generally go well.
View ArticleRe: Keyboard shortcut for switching to/from model tree
Or Shift+Tab Seems to work too .
View ArticleClik here to view.
Re: screen display problems on 28" 4k screen. line colors barely visible -...
If I'm reading NVidia's spec correctly, it looks like it should be able to drive 4 monitors simultaneously at that resolution (via Display Port).
View ArticleClik here to view.
Re: show two positions
I'm not sure, but I think you can do it with Exploded views and combined states: 1. Create a exploded view and save it2. Open the view manager and turn on "Display combined views" (in tab "all")3. In...
View ArticleClik here to view.
How to plot a single element in a matrix vs. a variable?
I'm trying to plot c(0,1) vs cap
View ArticleRe: Lines in 3D space . . .
Is there any question you would like to ask? And second - is there anything we should see on that stamp size mini photo? Its better to attach you worksheet.
View ArticleRe: How to plot a single element in a matrix vs. a variable?
c is defined as a function with just one argument, so you cannot call it with two arguments (0,1). Its not clear to me what you are trying to do.Maybe a good idea to give further informations and...
View ArticleRe: Mathcad Prime E-Books and Function Packs
Jonathan Seeley wrote: I've ignored Prime for several years now, so I'm trying to have an open mind and re-evaluate it. It would be nice if PTC would have an honest discussion of "What's still missing...
View Article